Automatic Transmission Fluids
Coming Soon...
Oscar Jade Gold OEM Specific F SAE 5W30 is a very high performance, low viscosity fluid, fully synthetic mainline lubricant for gasoline and light vehicle diesel engines, including the ones complying with ACEA A5/B5 standard. These oils may be unsuitable for use in some engines. Helps to lengthen the engine life thanks to its excellent resistance to temperature variations and permits an extralong oil change interval.
Gasoline and diesel engines of passenger cars. These oils may be unsuitable for use in some engines.
Meets and exceeds: ACEA A5/B5, Ford WSS-M2C913-D; Ford WSS-M2C913-C; Renault RN 0700
| PARAMETERS | TEST METHOD | UNIT | Oscar Jade Gold OEM specific F SAE 5W30 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
0.850 |
|
Viscosity @ 100°C |
ASTM D445 |
cSt |
10 |
|
Viscosity @ 40°C |
ASTM D445 |
cSt |
52 |
|
Viscosity Index (min) |
ASTM D2270 |
|
160 min |
|
Cold Crank Simulator |
ASTM D5293 |
cP |
5,800 @ -30 °C |
|
HTHS Viscosity 150°C |
- |
mPa.s |
≥ 2.9 and ≥ 3.5 |
|
Pour Point |
ASTM D97 |
°C |
-40 |
|
Flash Point |
ASTM D92 |
°C |
230 |
|
Total Base Number (TBN) |
ASTM D2896 |
mg KOH/g |
11 |
Oscar Zircon Starlight is a high-performance lubricant used in on-road diesel technology. Contains excellent viscosity stability in service, guaranteeing effective engine lubrication in severe conditions. Outstanding detergent, dispersant and anti-wear properties keep the engine clean and enable efficient control of soot, sludge and piston deposits.
It is recommended for Euro 3, and previous engines of most European and American manufacturers. It is also adapted to Euro 5 and previous engines of some manufacturers with appropriate oil drain intervals. Recommended for use in a wide range of heavy-duty applications and operating environments found in the on-road transport and off-road mining, forestry, construction and agricultural industries.
Meets and exceeds:
API CI-4; API CH-4 ; API CG-4; API CF-4; API CF; ACEA E7; ACEA E4, E5; API SL
| PARAMETERS | TEST METHOD | UNIT | Oscar Zircon Starlight SAE 5W30 API CI-4 SL ACEA E7 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
0.860 |
|
Viscosity @ 100°C |
ASTM D445 |
cSt |
10 |
|
Viscosity @ 40°C |
ASTM D445 |
cSt |
52 |
|
Viscosity Index (min) |
ASTM D2270 |
|
160 min |
|
Cold Crank Simulator |
ASTM D5293 |
cP |
5,800 @ -30 °C |
|
Pour Point |
ASTM D97 |
°C |
-42 |
|
Flash Point |
ASTM D92 |
°C |
220 |
|
Total Base Number (TBN) |
ASTM D2896 |
mg KOH/g |
11 |
Oscar Jade 4T Super Scooter 10W30 is a fully synthetic motorcycle oil specially designed to meet today’s 4-Stroke scooter specifications where JASO MB specification is required. JASO MB lubricant ensures optimal engine performance and fuel economy on all scooters without wet clutch.
For scooters without wet clutch and where JASO MB specification is required.
Meets and exceeds:
• API SL / SJ / SH / SG; JASO MB
| PARAMETERS | TEST METHOD | UNIT | Oscar Jade 4T Super Scooter SAE 10W30 API SL JASO MB |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
0.870 |
|
Viscosity @ 100°C |
ASTM D445 |
cSt |
10.5 |
|
Viscosity @ 40°C |
ASTM D445 |
cSt |
69 |
|
Viscosity Index |
ASTM D2270 |
- |
143 |
|
Pour Point |
ASTM D97 |
˚C |
-30 |
|
Flash Point |
ASTM D92 |
˚C |
230 |
PRODUCT DESCRIPTION
OSCAR HYDRA XP ZAF re zinc- and ash-free, demulsifying and universally usable hydraulic and industrial gear oils of the latest generation with excellent ageing stability, outstanding wear protection (FZG A/8.3/90: >12) and high corrosion protection. OSCAR HYDRA XP ZAF oils fulfill and surpass the requirements on hydraulic oils acc. to DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP
Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series “HydraXP” are fitted to all your industrial applications.
OSCAR HYDRA XP ZAF oils are high grade products, which can be used in all hydraulic systems. OSCAR HYDRA XP products are recommended for use in machine tools where contact between hydraulic fluids and metalworking oils can take place.
Fulfil and surpass the minimum demands of DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP.
| PARAMETERS | TEST METHOD | UNIT | OSCAR HydraXP ZAF 10 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
845 |
|
Flash Point |
ASTM D92 |
˚C |
168 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
10 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
2.7 |
|
Viscosity Index |
ASTM D2270 |
- |
108 |
|
Pour Point |
ASTM D97 |
°C |
-33 |
PRODUCT DESCRIPTION
OSCAR HYDRA XP ZAF re zinc- and ash-free, demulsifying and universally usable hydraulic and industrial gear oils of the latest generation with excellent ageing stability, outstanding wear protection (FZG A/8.3/90: >12) and high corrosion protection. OSCAR HYDRA XP ZAF oils fulfill and surpass the requirements on hydraulic oils acc. to DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP
Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series “HydraXP” are fitted to all your industrial applications.
OSCAR HYDRA XP ZAF oils are high grade products, which can be used in all hydraulic systems. OSCAR HYDRA XP products are recommended for use in machine tools where contact between hydraulic fluids and metalworking oils can take place.
Fulfil and surpass the minimum demands of DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP.
| PARAMETERS | TEST METHOD | UNIT | OSCAR HydraXP ZAF 22 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
868 |
|
Flash Point |
ASTM D92 |
˚C |
165 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
22 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
4.3 |
|
Viscosity Index |
ASTM D2270 |
- |
105 |
|
Pour Point |
ASTM D97 |
°C |
-30 |
PRODUCT DESCRIPTION
OSCAR HYDRA XP ZAF re zinc- and ash-free, demulsifying and universally usable hydraulic and industrial gear oils of the latest generation with excellent ageing stability, outstanding wear protection (FZG A/8.3/90: >12) and high corrosion protection. OSCAR HYDRA XP ZAF oils fulfill and surpass the requirements on hydraulic oils acc. to DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP
Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series “HydraXP” are fitted to all your industrial applications.
OSCAR HYDRA XP ZAF oils are high grade products, which can be used in all hydraulic systems. OSCAR HYDRA XP products are recommended for use in machine tools where contact between hydraulic fluids and metalworking oils can take place.
Fulfil and surpass the minimum demands of DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP.
| PARAMETERS | TEST METHOD | UNIT | OSCAR HydraXP ZAF 32 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
875 |
|
Flash Point |
ASTM D92 |
˚C |
210 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
32 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
5.4 |
|
Viscosity Index |
ASTM D2270 |
- |
102 |
|
Pour Point |
ASTM D97 |
°C |
-30 |
PRODUCT DESCRIPTION
OSCAR HYDRA XP ZAF re zinc- and ash-free, demulsifying and universally usable hydraulic and industrial gear oils of the latest generation with excellent ageing stability, outstanding wear protection (FZG A/8.3/90: >12) and high corrosion protection. OSCAR HYDRA XP ZAF oils fulfill and surpass the requirements on hydraulic oils acc. to DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP
Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series “HydraXP” are fitted to all your industrial applications.
OSCAR HYDRA XP ZAF oils are high grade products, which can be used in all hydraulic systems. OSCAR HYDRA XP products are recommended for use in machine tools where contact between hydraulic fluids and metalworking oils can take place.
Fulfil and surpass the minimum demands of DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP.
| PARAMETERS | TEST METHOD | UNIT | OSCAR HydraXP ZAF 68 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
881 |
|
Flash Point |
ASTM D92 |
˚C |
225 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
68 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
8.9 |
|
Viscosity Index |
ASTM D2270 |
- |
105 |
|
Pour Point |
ASTM D97 |
°C |
-24 |
PRODUCT DESCRIPTION
OSCAR HYDRA XP ZAF re zinc- and ash-free, demulsifying and universally usable hydraulic and industrial gear oils of the latest generation with excellent ageing stability, outstanding wear protection (FZG A/8.3/90: >12) and high corrosion protection. OSCAR HYDRA XP ZAF oils fulfill and surpass the requirements on hydraulic oils acc. to DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP
Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series “HydraXP” are fitted to all your industrial applications.
OSCAR HYDRA XP ZAF oils are high grade products, which can be used in all hydraulic systems. OSCAR HYDRA XP products are recommended for use in machine tools where contact between hydraulic fluids and metalworking oils can take place.
Fulfil and surpass the minimum demands of DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP.
| PARAMETERS | TEST METHOD | UNIT | OSCAR HydraXP ZAF 100 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
883 |
|
Flash Point |
ASTM D92 |
˚C |
248 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
100 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
11.4 |
|
Viscosity Index |
ASTM D2270 |
- |
100 |
|
Pour Point |
ASTM D97 |
°C |
-18 |
PRODUCT DESCRIPTION
OSCAR HYDRA XP ZAF re zinc- and ash-free, demulsifying and universally usable hydraulic and industrial gear oils of the latest generation with excellent ageing stability, outstanding wear protection (FZG A/8.3/90: >12) and high corrosion protection. OSCAR HYDRA XP ZAF oils fulfill and surpass the requirements on hydraulic oils acc. to DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP
Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series “HydraXP” are fitted to all your industrial applications.
OSCAR HYDRA XP ZAF oils are high grade products, which can be used in all hydraulic systems. OSCAR HYDRA XP products are recommended for use in machine tools where contact between hydraulic fluids and metalworking oils can take place.
Fulfil and surpass the minimum demands of DIN 51524-2: HLP and ISO 11158-HM as well as on industrial gear oils DIN 51517-3: CLP.
| PARAMETERS | TEST METHOD | UNIT | OSCAR HydraXP ZAF 150 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
889 |
|
Flash Point |
ASTM D92 |
˚C |
250 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
150 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
14.8 |
|
Viscosity Index |
ASTM D2270 |
- |
98 |
|
Pour Point |
ASTM D97 |
°C |
-18 |
PRODUCT DESCRIPTION
OSCAR HYDRA XP ZF HIV are zinc- and ash-free, demulsifying and universally usable hydraulic and industrial gear oils of the latest generation with excellent ageing stability, outstanding wear protection (FZG A/8.3/90: >12) and high corrosion protection. OSCAR HYDRA XP ZF HVI oils fulfill and surpass the requirements on hydraulic oils acc. to DIN 51524-3; ISO 6743/4, HV ISO 11158, HV. Denison HF0, HF1, HF2
Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series “HydraXP” are fitted to all your industrial applications.
OSCAR HYDRA XP ZF HVI oils are high grade products, which can be used in all hydraulic systems. OSCAR HYDRA XP products are recommended for use in machine tools where contact between hydraulic fluids and metalworking oils can take place.
Fulfil and surpass the minimum demands of DIN 51524-3; ISO 6743/4, HV ISO 11158, HV. Denison HF0, HF1, HF2
| PARAMETERS | TEST METHOD | UNIT | Oscar HydraXP ZF HVI 15 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
859 |
|
Flash Point |
ASTM D92 |
˚C |
180 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
15 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
3.8 |
|
Viscosity Index |
ASTM D2270 |
- |
151 |
|
Pour Point |
ASTM D97 |
°C |
-45 |
PRODUCT DESCRIPTION
OSCAR HYDRA XP ZF HIV are zinc- and ash-free, demulsifying and universally usable hydraulic and industrial gear oils of the latest generation with excellent ageing stability, outstanding wear protection (FZG A/8.3/90: >12) and high corrosion protection. OSCAR HYDRA XP ZF HVI oils fulfill and surpass the requirements on hydraulic oils acc. to DIN 51524-3; ISO 6743/4, HV ISO 11158, HV. Denison HF0, HF1, HF2
Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series “HydraXP” are fitted to all your industrial applications.
OSCAR HYDRA XP ZF HVI oils are high grade products, which can be used in all hydraulic systems. OSCAR HYDRA XP products are recommended for use in machine tools where contact between hydraulic fluids and metalworking oils can take place.
Fulfil and surpass the minimum demands of DIN 51524-3; ISO 6743/4, HV ISO 11158, HV. Denison HF0, HF1, HF2
| PARAMETERS | TEST METHOD | UNIT | Oscar HydraXP ZF HVI 32 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
871 |
|
Flash Point |
ASTM D92 |
˚C |
178 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
32 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
6.3 |
|
Viscosity Index |
ASTM D2270 |
- |
152 |
|
Pour Point |
ASTM D97 |
°C |
-48 |
PRODUCT DESCRIPTION
OSCAR HYDRA XP ZF HIV are zinc- and ash-free, demulsifying and universally usable hydraulic and industrial gear oils of the latest generation with excellent ageing stability, outstanding wear protection (FZG A/8.3/90: >12) and high corrosion protection. OSCAR HYDRA XP ZF HVI oils fulfill and surpass the requirements on hydraulic oils acc. to DIN 51524-3; ISO 6743/4, HV ISO 11158, HV. Denison HF0, HF1, HF2
Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series “HydraXP” are fitted to all your industrial applications.
OSCAR HYDRA XP ZF HVI oils are high grade products, which can be used in all hydraulic systems. OSCAR HYDRA XP products are recommended for use in machine tools where contact between hydraulic fluids and metalworking oils can take place.
Fulfil and surpass the minimum demands of DIN 51524-3; ISO 6743/4, HV ISO 11158, HV. Denison HF0, HF1, HF2
| PARAMETERS | TEST METHOD | UNIT | Oscar HydraXP ZF HVI 46 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
879 |
|
Flash Point |
ASTM D92 |
˚C |
186 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
46 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
8.1 |
|
Viscosity Index |
ASTM D2270 |
- |
149 |
|
Pour Point |
ASTM D97 |
°C |
-45 |
PRODUCT DESCRIPTION
OSCAR HYDRA XP ZF HIV are zinc- and ash-free, demulsifying and universally usable hydraulic and industrial gear oils of the latest generation with excellent ageing stability, outstanding wear protection (FZG A/8.3/90: >12) and high corrosion protection. OSCAR HYDRA XP ZF HVI oils fulfill and surpass the requirements on hydraulic oils acc. to DIN 51524-3; ISO 6743/4, HV ISO 11158, HV. Denison HF0, HF1, HF2
Every industrial lubricant recommendation should be done after an expert consultation on the application in question. Only then the best lubricant can be selected. Oscar hydraulic oils series “HydraXP” are fitted to all your industrial applications.
OSCAR HYDRA XP ZF HVI oils are high grade products, which can be used in all hydraulic systems. OSCAR HYDRA XP products are recommended for use in machine tools where contact between hydraulic fluids and metalworking oils can take place.
Fulfil and surpass the minimum demands of DIN 51524-3; ISO 6743/4, HV ISO 11158, HV. Denison HF0, HF1, HF2
| PARAMETERS | TEST METHOD | UNIT | Oscar HydraXP ZF HVI 68 |
|---|---|---|---|
|
Density @ 15°C |
ASTM D1298 |
kg/l |
882 |
|
Flash Point |
ASTM D92 |
˚C |
210 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
68 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
11 |
|
Viscosity Index |
ASTM D2270 |
- |
154 |
|
Pour Point |
ASTM D97 |
°C |
-42 |
Oscar HydraXP HVI series are hydraulic lubricating oils (machine oils) with a high Viscosity Index and additives to improve ageing resistance, corrosion protection and wear protection. Mineral oil-base and containing zinc.
Suitable for all hydraulic systems, especially when a high viscosity index is specified or if excess viscosity during start-ups or insufficient viscosity at operating temperatures is a problem. High VI provides multi-grade characteristics.
HVLP hydraulic and general lubricating oils according to DIN 51 524-3. ISO 6743/4, HV ISO 11158, HV. Denison HF0, HF1, HF2.
|
Density @ 15°C |
ASTM D1298 |
kg/l |
859 |
|
Flash Point |
ASTM D92 |
˚C |
180 |
|
Kinematic viscosity at 40 °C |
ASTM D445 |
mm2/s |
15 |
|
Kinematic viscosity at 100 °C |
ASTM D445 |
mm2/s |
3.8 |
|
Viscosity Index |
ASTM D2270 |
- |
151 |
|
Pour Point |
ASTM D97 |
°C |
-45 |
